|Place of Origin:Shandong, China (Mainland)||Brand Name:Hoteam|
|Model Number:HTQF series||rating compensation current:30~600A|
|mains voltage:600V-20/+15%||mains frequency:50/60Hz+/-5%|
|filter range:2~50th||filter frequency:>97%|
|IP:IP40||Response time:Transient response<0.1ms,|
|Special technology:multilevel technology||Power loss:≤3% rated compensation capacity|
active power harmonic filter
Introduction of Functions
Harmonic Filter:HTQF is composed of command current computing circuit and compensation current generating circuit. Command current computing circuit conducts real-time monitoring of current in circuit; switch the analogue current signals into digital signals, and send the signals into DSP for handling; separate harmonics and fundamental wave, send drive pulse in form of PWM signals to compensation current generating circuit; drive IGBT power module, produce compensation current input network which has the same amplitude as harmonic amplitude and inverse polarity; compensate or balance out harmonic current, eliminate power harmonics actively, and thus realize the dynamic quick and complement treatment of power harmonics.
Dynamic reactive power compensation: While filtering harmonics, according to detected need for reactive power compensation, HTQF command current computing circuit can control internal capacitive and inductive fundamental current of compensation current generating circuit, conduct real-time compensation, set the target value of reactive power compensation through operation board. There are 4 working modes for choice, namely, “filter priority”, “reactive power priority”, “harmonic filter only”, “and reactive power compensation only”. The working mode should be selected according to specific conditions of power distribution system.
Correct unbalanced 3 phases:HTQF can compensate the unbalanced 3 phases respectively. It can conduct phase adjustment of active power through DC Energy Storage Systems shared by 3 phases, thus to correct unbalanced load of 3 phases. The operation of this function can also be set by operation board.
HTQF xL-0.6 technical parameter
HTQF 3L-0.69/xxxA three phase three line power filter
Apply to 3P3L system, filter was connected among three phase of power grid, it is suited to power system with or without neutral line, it can filter none-zero frequency harmonics, compensate reactive power and phase unbalanced.
Compensation current of single cabinet
Can be more than 97%
Filtering effect set
Can set separately to each harmonic
Reactive power compensation
Setting range of power factor is from inductive0.6 to capacitive 0.6
Programmable balance of power
multilevel technology, can reduce current ripple effectively
Automatic current limiting when 100% rating output
≤3% rated compensation capacity
3 sets,0.2magnitude or more,secondary 5A
Current detection means
Source current detection or load current detection
Display and interface
Start/stop,reset,menu,confirm,fluctuation function keys and so on
orange:over current/overload operation
red:machine halt or alarm
4 digital input,2 digital alarm
10 sets at most
RAL7035(light gray),can be customized according to use requirements
Max 95%RH(no condensation)
Suitable for industrial big capacity load, such as rectifier, frequency converter, UPS, IF furnace, A rc furnace and so on.
Copyright © 2017 - 2020Shandong Hoteam Electric Co.,Ltd. All Rights Reserved